SK214-16A |
SK244-16A
|
SK215-4 |
SK245-4
|
| Rigid-
Fixed Depth |
Floating-
Fixed Depth |
Rigid
- Adjustable Depth |
Floating-Adjustable
Depth |
|
|
SK-4P3
|
|
| |
Installs
SK4000 studs through grommets |
Installs
CLoc 2000 and 4000 series retainers |
Design considerations
–
Three basic rules apply
to ¼ Turn Fasteners: Spacing – 4 inches,
Edge distance – 5/8 inch, Panel overlap - .750
(SK2600/2800 Series), 1.00 (SK4002/40S5 Series)*
Panel Thickness –
Only a factor when using fixed depth receptacles. All
fastener series parts vary in length (grip range). Each
dash number varies by .030. Combined total thickness
determines required fastener as determined by Skybolt
chart. When using Adjustable Receptacles, one fastener
length will accommodate combined thickness from .020
to over ½”. For SK4002/40S5 Series, outer
panel thickness will determine required grommet. See
Skybolt grommet chart.
Stainless – Improved
finish and Skybolt Stainless CLocs® are actually
stronger than steel!
Skytanium® - The
Ultimate in Lightweight Materials at an Effective Cost
with no sacrifice in Steel Strength Rating (High Grade
Aluminum )
Notes* - Add stud retainer for SK2600/2800 and grommet
retainer for SK4002/40S5. Overlap increased to 1.125
when using SK245 Floating Receptacle with SK4002/40S5
series.
|
